STANDARDReproduction Of Original Radiator & Heater Hose Clamps Kit Includes: 2 Upper Hose Clamps 2 Lower Hose Clamps 2 5/8 Heater Hose Clamp Wire Rings 2 3/4 Heater Hose Clamp Wire Rings
Tip: Use a crescent type wrench at the square nut to hold it so it and the clamp do not twist when tightening. Then after a few heat cycles repeat. Also, if the bent tabs that are on the clamp are crooked, you may have to straighten them out. You may have to reinstall these clamps multiple times until you get a good fitment. Also, the GM AIM makes not of using a sealer inside the heater hoses when using Tower Clamps. You can run a bead of Permatex inside the hose.
| Quantity | Model | Product Name |
| 2 | 2029029 | Camaro Heater Hose Clamp, 5/8, Wire Ring, 1967-1968 |
| 2 | 2029030 | Camaro Heater Hose Clamp, 3/4, Wire Ring, 1967-1968 |
| 2 | 2029681 | Camaro Radiator Hose Clamp, Upper, Tower Style, 1967-1969 |
| 2 | 2029682 | Camaro Radiator Hose Clamp, Lower, Tower Style, 1967-1969 |
| Make | Model | Years |
| Chevrolet | Camaro | 1967 - 1968 |
