Wire-ring clamps like this were used on all 1967-68 Camaro heater hoses from the factory and being basically painted they were very susceptible to rust and corrosion. …
Wire-ring clamps like this were used on all 1967-68 Camaro heater hoses from the factory and being basically painted they were very susceptible to rust and corrosion. …
Tower clamps like this were used on all 1969 Camaro heater hoses from the factory and being cold galvanized they were very susceptible to rust and corrosion.
…
Tower clamps like this were used on all 1967-69 Camaro radiator hoses from the factory and being cold galvanized they were very susceptible to rust and corrosion.
Tip: Use a crescent type wrench at the square nut to hold it so it and…
Tower clamps like this were used on all 1967-69 Camaro radiator hoses from the factory and being cold galvanized they were very susceptible to rust and corrosion.
…
Reproduction Technically Correct For 1969 Black Reinforced Rubber Ribbed Down The Length Of The Hose As Original Quality reproduction of the original ribbed heater hoses for 1969 Camaros. Why go to the parts store and buy a generic hose…
Reproduction Of Original Technically Correct For 1967 & 1968 Black Reinforced Rubber GM Markings On One Hose Only As Original The hoses on your 1967, 1968, or 1969 Camaro are absolutely vital to keep everything running smoothly and…
High Quality Molded Heater Hose 13/16 x 9 13/32 V-8 5.7L The hoses on your 1987-1992 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such, these hoses…
High Quality Molded Heater Hose 3/4 x 21 11/16 V-8 5.0L & V-8 5.7L The hoses on your 1987-1992 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such…
Quality Molded Heater Hose 19/32 x 26 13/32 V-8 5.0L The hoses on your 1988-1992 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such, these hoses need…
This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. Officially Licensed GM…
On original Camaro radiators, the overflow hose ran from the port on the water filler neck, down the passenger's side radiator tank and finally down to the ground. Radiator Overflow tanks were not installed from the factory on 1967-69…
High Quality Molded Heater Hose 23/32 x 16 13/16 V6 2.8L The hoses on your 1985-1986 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such, these hoses…
Quality Molded Heater Hose 5/8 x 14 29/32 V-6 3.4L The hoses on your 1993-1995 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such, these hoses need to…
High Quality Molded Heater Hose 3/4 x 18 3/32 V-6 2.8L The hoses on your 1987-1989 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled coolant flowing freely in your vehicle. As such, these hoses need…
My Account
