×

WE ARE CURRENTLY EXPERIENCING DIFFICULTIES WITH OUR PHONE LINES.  PLEASE UTILIZE CHAT OR EMAIL TO CONTACT US UNTIL THIS IS RESOLVED.

877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
PLACE YOUR CAMARO ORDER NOW

Hooker Super Competition Shorty Header 2064-1HKR

Hooker Super Competition Shorty Header 2064-1HKR
$1,192.99 ea
NEWBackordered until 12/31/2021Out of stock at HOLLEY PERFORMANCE PRODUCTS as of 09/27/2021
Model: 4008672
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
STORE PICKUP
[More Info]
Hooker Street Force Headers are designed to be a high performance alternative to the stock O.E. manifolds. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.
Features:
  • Tuned Length Tubes For Max Exhaust Scavenging/Velocity
  • Industrys Best Weld For Durability
  • Machined Flanges For Perfect Seal
  • Mandrel Bent Tubing For Smooth Exhaust Flow
  • All Hardware Included
Holley Performance Emission Code 1: This part is legal for sale and use on Emissions Controlled Vehicles; in all 50 states; when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
Installation Notes:
Will not work with angle plug heads. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty.
About Hooker

The Hooker line of Super Competition and Competition headers, mufflers and catback exhaust systems are the most complete on the market.

Downloads:

Download Name File Size
2064-1HKR.pdf160.71KB
2064hkrrev2.pdf212.88KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Camaro 1995 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Dual Catalytic Converters Only on 1995 Model~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Chevrolet Camaro 1996 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Angle Plug Heads~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Includes High Flow Y-Pipe/Flange To Accom. Stock Catalytic-Converter Cars~Some Cutting & Welding Required To Install Y-Pipe~Will Not Fit Angle Plug Heads
Chevrolet Camaro 1997 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Angle Plug Heads~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Includes High Flow Y-Pipe/Flange To Accom. Stock Catalytic-Converter Cars~Some Cutting & Welding Required To Install Y-Pipe~Will Not Fit Angle Plug Heads
Pontiac Firebird 1995 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Dual Catalytic Converters Only on 1995 Model~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Pontiac Firebird 1996 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Angle Plug Heads~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Includes High Flow Y-Pipe/Flange To Accom. Stock Catalytic-Converter Cars~Some Cutting & Welding Required To Install Y-Pipe~Will Not Fit Angle Plug Heads
Pontiac Firebird 1997 5.7L / 350 / V8 Metallic Ceramic Coating; Tube 1.625 in. OD; Collector Size 2.5 in. x 5 in. L; Port Shape Same As Port;CARB E.O. D-164-5
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Angle Plug Heads~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Includes High Flow Y-Pipe/Flange To Accom. Stock Catalytic-Converter Cars~Some Cutting & Welding Required To Install Y-Pipe~Will Not Fit Angle Plug Heads

Specifications:

Application Automotive
CARB (California) Compliant Yes
CARB EO# D-164-5
Coated Finish Metallic Ceramic
Collector Diameter 2.500 in.
Collector Tube Size 2.500 in.
Emission Code 1
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy LT1
Finish Silver Metallic Ceramic
Head Style Shorty
Header Finish Silver Ceramic
Header Style Shorty
Material Stainless Steel
Part Type Exhaust Header
Port Shape Same As Port/Can Be Matched
Primary Tube Dia. 1-5/8 inch
Primary Tube Diameter 1.625 in.
Tube Diameter 1.625 in.
Tube Direction Down Swept
Tube Material Mild Steel
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker Super Competition Shorty Header 2064-1HKR:
* Your Name:
* Email (This will not be displayed)
Question:
Camaro Depot 2021