877.589.9860 Contact Us Mon-Sat 10a-6p
PLACE YOUR CAMARO ORDER NOW

Hooker Long Tube Stepped Headers, Painted 2106HKR

Hooker Long Tube Stepped Headers, Painted 2106HKR
Hooker Long Tube Stepped Headers, Painted 2106HKRHooker Long Tube Stepped Headers, Painted 2106HKRHooker Long Tube Stepped Headers, Painted 2106HKRHooker Long Tube Stepped Headers, Painted 2106HKRHooker Long Tube Stepped Headers, Painted 2106HKRHooker Long Tube Stepped Headers, Painted 2106HKR
$1,562.99 ea
NEWOut of stock with our supplier as of 02/02/2024
Model: 3490377
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 1
Hooker Headers announces the release of their new long tube stepped headers for the classic 67-69 F-Body (Camaro/Firebird) and 68-72 X-Body vehicles (Nova, Omega, Ventura, Apollo). These headers bring modern features and fitment to these classic platforms. Application fits motors with standard port heads
Features:
  • Long tube geometry designed for maximum ground clearance and optimized engine compartment fitment.
  • 3/8” laser cut flanges, TIG welded and flat finished for maximum strength and a leak free seal.
  • O2 bungs included for compatibility with EFI systems or air/fuel ratio meters (plugs also included).
  • Race inspired 1-3/4" to 1-7/8" stepped design for maximum flow and a broad torque curve
  • Coated in high heat resistant black paint.
  • Fits standard port heads.
  • Compatible with straight and angle plug heads.
  • Compatible with all stock manual and power steering boxes.
  • Compatible with GM 152 and 168 tooth starters.
  • Compatible with stock A/C evaporator case.
  • Compatible with stock floor shift automatic and manual transmissions. Column shift automatics require the use of Lokar, or similar, aftermarket shift linkage.
  • Compatible with Ridetech Tru-Turn steering system.
  • Compatible with aftermarket large sump oil pans.
  • Bolt-in installation capability with new Hooker 2.5” and 3” exhaust systems for these applications, with available adapters.
  • Constructed with slip-fit collector for maximum ground clearance
These headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. -Not compatible with stock manual transmission reverse lock-out linkage, aftermarket/custom linkage or cable drive set-up required to maintain mechanism operation.
Installation Notes:
These headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. -Not compatible with stock manual transmission reverse lock-out linkage, aftermarket/custom linkage or cable drive set-up required to maintain mechanism operation.

Downloads:

Download Name File Size
199r10700rev5.pdf356.52KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Submodel Years Engine
Chevrolet Camaro Base 1967 5.3L / 327 / V8
Chevrolet Camaro Base 1968 5.3L / 327 / V8
Chevrolet Camaro Base 1969 5.3L / 327 / V8
5.7L / 350 / V8
5.0L / 307 / V8
Chevrolet Camaro RS 1967 5.7L / 350 / V8
5.3L / 327 / V8
Chevrolet Camaro RS 1968 5.3L / 327 / V8
Chevrolet Camaro RS 1969 5.0L / 307 / V8
5.7L / 350 / V8
5.3L / 327 / V8
Chevrolet Camaro SS 1967 5.7L / 350 / V8
Chevrolet Camaro SS 1968 5.7L / 350 / V8
Chevrolet Camaro SS 1969 5.7L / 350 / V8
Chevrolet Camaro Z28 1967 4.9L / 302 / V8
Chevrolet Camaro Z28 1968 4.9L / 302 / V8
Chevrolet Camaro Z28 1969 4.9L / 302 / V8

Specifications:

Bolt Size 3/8-16 x 3/4, 3/8-16 x 3/4
CARB (California) Compliant No
Collector Diameter 3.00 inch
Emission Code 4
Engine Chevrolet Small Block Gen I
Flange Size 3/8 Inch
Header Finish Black Paint
Header Style Long Tube
Part Type Exhaust Header
Primary Tube Dia. 1-3/4 inch
Product Type Headers
Proposition 65 www.P65Warnings.ca.gov
Tube Material Mild Steel

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker Long Tube Stepped Headers, Painted 2106HKR:
Camaro Depot 2024