877.589.9860 Contact Us Mon-Sat 10a-6p
PLACE YOUR CAMARO ORDER NOW

UMI Performance Torque Arm Relocation Kit- 4L60E - Automatic | 2210-B Camaro 1993-97

UMI Performance  Torque Arm Relocation Kit- 4L60E - Automatic | 2210-B Camaro 1993-97
$629.99 kt
NEWARRIVING SOONEstimated Ship Date 04/10/2024 (If Ordered Today)
Model: 3271485
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY

  • Fits 1993 To 1997 Chevrolet Camaro
  • Fits 1993 To 1997 Pontiac Firebird
  • This Cross Member Has A Built In Torque Arm Mount Removing The Torque Arm From The Transmission Tail Shaft And Protecting It From Failure
  • Our Cross Member Is Designed To Tuck Tight Against The Vehicle Chassis And Will Not Effect Vehicle Ground Clearance
  • This Set-up Works With Virtually Any Torque Arm On The Market As Long As It Bolts Into The Stock Location
  • Works Excellently With The Stock Torque Arm
  • In Most Cases This Cross Member Will Save Weight Over The Stock Unit While Being Structurally Stronger
  • This Kit Is 100% Bolt In And Requires No Drilling, No Cutting And No Welding

Note: This product must be used with a solid one-piece polyurethane bushing. It will not work with the factory bushing that utilizes a two-piece design. If using a stock torque arm with this relocation kit an aftermarket polyurethane bushing must be purchased. This item can be purchased below, Item # 3004.*

The torque arm relocation kit from UMI Performance is designed to remove the front mounting point of the torque arm off the transmission and protect the tail shaft from damage. General Motors tail shaft mounted design works great for a stock driven vehicle however it is not designed to take abuse and hard launches. This set-up replaces your transmission cross member with a new stronger set-up with a built in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock style aftermarket torque arm as well as the factory torque arm. This unit is built using rectangular mild steel tubing, 0.188” mild steel mounting plates and includes all appropriate hardware needed for the installation. The torque arm mount is machined from 0.250” thick mild steel and features a new clam shell for appropriately attaching the torque arm to the new cross member. Please use the FAQ’s below for additional information.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1993 - 1997

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

UMI Performance Torque Arm Relocation Kit- 4L60E - Automatic | 2210-B Camaro 1993-97:
Camaro Depot 2024