×

WE ARE CURRENTLY EXPERIENCING DIFFICULTIES WITH OUR PHONE LINES.  PLEASE UTILIZE CHAT OR EMAIL TO CONTACT US UNTIL THIS IS RESOLVED.

877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
PLACE YOUR CAMARO ORDER NOW
Home

Hooker Long Tube Header 2105HKR

Hooker Long Tube Header 2105HKR
Hooker Long Tube Header 2105HKRHooker Long Tube Header 2105HKRHooker Long Tube Header 2105HKRHooker Long Tube Header 2105HKRHooker Long Tube Header 2105HKRHooker Long Tube Header 2105HKR
$977.99 ea
NEWARRIVING SOONEstimated Ship Date 10/12/2021 (If Ordered Today)7 available from HOLLEY PERFORMANCE PRODUCTS as of 09/27/2021
Model: 4008693
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 1
STORE PICKUP
[More Info]
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.
Features:
  • Long Tube Geometry Designed For Max Ground Clearance
  • Laser Cut Flanges TIG Welded And Flat Finished
  • Leak-Free Seal
  • O2 Bungs Included
  • Bolt-In Installation
Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Installation Notes:
These headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. -Not compatible with stock manual transmission reverse lock-out linkage, aftermarket/custom linkage or cable drive set-up required to maintain mechanism operation.
About Hooker

The Hooker line of Super Competition and Competition headers, mufflers and catback exhaust systems are the most complete on the market.

Downloads:

Download Name File Size
199r10700rev5.pdf356.52KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Camaro 1967 5.3L / 327 / V8
4.9L / 302 / V8
5.7L / 350 / V8		 Black Painted; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Not Compatible w/Aftermarket/Custom Linkage Or Cable Drive Set-Up~Not Compatible w/Stock Manual Trans Reverse Lock-Out Linkage
Chevrolet Camaro 1968 5.3L / 327 / V8
4.9L / 302 / V8
5.4L / 327 / V8
5.7L / 350 / V8		 Black Painted; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Not Compatible w/Aftermarket/Custom Linkage Or Cable Drive Set-Up~Not Compatible w/Stock Manual Trans Reverse Lock-Out Linkage
Chevrolet Camaro 1969 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
5.7L / 350 / V8		 Black Painted; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Not Compatible w/Aftermarket/Custom Linkage Or Cable Drive Set-Up~Not Compatible w/Stock Manual Trans Reverse Lock-Out Linkage

Specifications:

Application Automotive
Coated Finish Black
Collector Diameter 3.000 in.
Collector Tube Size 3.000 in.
Emission Code 4
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block
Finish Black Paint
Flange Length 0.375 in.
Head Style Long-Tube
Header Finish Black Paint
Header Style Long Tube
Material Stainless Steel
Part Type Exhaust Header
Port Shape Same As Port/Can Be Matched
Primary Tube Dia. 1-3/4 inch
Primary Tube Diameter 1.750 in.
Tube Diameter 1.750 in.
Tube Direction Down Swept
Tube Material Mild Steel
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker Long Tube Header 2105HKR:
* Your Name:
* Email (This will not be displayed)
Question:
Camaro Depot 2021