Headliner & Soft Interior Trim Adhesive
Best Quality
Headliner & Trim Adhesive
Weather Resistant
Light Tan Syrup Glue Stays Flexible During Installation
Convenient Brush Under Cap
4 Oz…
The sail panel fasteners for your 1967, 1968, or 1969 first generation Camaro / Firebird sail panels attach to the back of the panels via three holes in the hardboard. Then, the sail panel fasteners are pressed into three holes…
OER® reproduction of the inner rear sail panels for all 1975-81 models. Injection molded as original including correct texture and mounting tab locations for easy installation. Available in black. Can be painted to match your interior…
This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material.
Headliner installation is almost never easy, but having the right tools can make it much easier. This tool helps you…
A headliner is the material that covers the ceiling of a vehicle, but it does more than hide bare metal with color-coordinated soft fabric. Headliners provide insulation against heat and noise, and they can also hide wiring and hardware…
These are high quality OER® reproductions of the very hard to find interior headliner moldings for 1968 models. The 6-piece kit includes the front, rear and side headliner molding strips. These moldings are an exact reproduction of the…
Correct Reproduction Clip Set
Manufactured On New Tooling
Six Piece Set
Used To Attach Headliner Side Trim Moldings To Body
Designed For All Bow Or Rod Type Headliners
Having the right hardware is as important as using…
This headliner is designed to take the place of the cardboard headliner completely. Unlike the original, this reproduction headliner does not require use of a foam backing which often disintegrates and causes the headliner material to…
Correct Madrid Grain Patern Exact Fit & Length Made From Softer Material For Easier Installation Fits Bow & Board Style Headliners Black Only, Paint To Match
…
Reproduction of the original inner rear trim moldings for use with all 1967-1968 models. The molding installs on the upper section of the rear window where the headliner meets the rear glass. Includes the RH-LH and center joint moldings…
NEW Correct Metal Side Headliner Trims for all 1970, 1971, 1972, and 1973 Camaro and Firebird models. Exact shape and details. These new headliner trims mounts on both sides of the headliner. This part is commonly rusted out or…
OER® reproduction of the inner rear sail panels for all 1973 models with a molded headliner. Injection molded as original including correct texture and mounting tab locations for easy installation. Available in black. Can be painted to…
These are high quality reproductions of the very hard to find interior headliner moldings for 1967 models. These side molding strips are an exact reproduction of the original, including steel inserts when required. Available in black…
Superior quality US made reproductions of rear 67-68 3 piece plastic headliner trim. UV resistant, black only, paint to match using our interior paint. (No primer required). Officially Licensed GM Restoration Parts from Trim Parts.
…
Weather Resistant Flexible Brush Under Cap 4oz. Can Original Firebird headliners are held in the center of the roof by five bows. On the front, rear and sides, the headliner is held by this glue on top of pieces of metal with stamped teeth…
Superb reproductions of the original inner windshield trim moldings, which install on the inner upper windshield section where the headliner meets the windshield. These moldings are notorious for becoming brittle or even disintegrating…
Correct Reproduction
Mounts As Original
Correct Finish And Texture
Available As Pair Only
Designed For Convertibles Only, Will Not Fit Coupes
Interior trim pieces have a tendency to deteriorate over time. Your…
Secure your headliner trim with this 10-piece clip set, designed specifically for 1982-1992 Chevrolet Camaro and Pontiac Firebird models. These factory-correct clips ensure a precise fit and stable attachment, preserving the original…