The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in the Camaro clutch bellhousing. Every time you push the clutch pedal in your manual transmission Camaro…
Original GM Part Extruded Black Rubber For All Camaros With Manual Transmission Fits In Pedal Support Brace To Avoid Clutch Pedal To Metal Support Contact Rubber parts are the first thing to disintegrate over time in your Camaro. Fits…
Reproduction Of Original Screws Into Bellhousing Your clutch fork ball stud is what is used to screw into your 1967, 1968, or 1969 Camaro?s bellhousing to mount the clutch fork. The clutch fork is used to push the throwout bearing in when…
Engineered and manufactured for reliability, these alloy steel flywheel bolts are heat treated to grade 8 specifications for extra strength. Kits are complete with lock washers, where needed, and are black plated to help resist rust and…
Set Of 6 Correct High Grade Bolts Attaches Pressure Plate To Flywheel Heat Treated To Grade 8 Includes Matching Washers Fasteners Yield 120,000 Psi Black Plated Finish 3/8-16 Thread Size Bolts Correct Through 1987, Will Need Different…
Set of four reproduction pedal shaft bushings. Used with all automatic and manual pedals. Group 0.831 and 4.626 GM Part #: 3798256, 3965692, 1247439, 140048221…
Best Quality Reproduction Bellcrank Seals Heavy, Die Cut Felt Fiber As Original Keeps Grease In The Clutch Bellcrank Where It Belongs 9/16 ID & 1? OD This little Camaro part does a big job and will wear out easily from years of use and…
Best Quality Reproduction Upper Pushrod Boot
Molded Rubber Boot With Encased Steel Mounting Flange
Seals Firewall Where Clutch Upper Pushrod Passes Through
Rubber parts on the firewall like this clutch upper…
Reproduction Of Original Molded Rubber Boot With Encased Steel Mounting Flange This Firebird reproduction clutch bellcrank upper push rod boot has been manufactured to original factory specifications using today's modern manufacturing…
Restoration Correct Original AC Delco Part Correct Fit And Finish Fits V6, Vin S And V8, Vin P Engines Also Fits RS 93, Z28 93-95 Made In USA Is the Clutch Master Cylinder leaking on your 1993-1995 Camaro, or does your clutch pedal feel…
Accurately machined Frame pivot ball stud fits all original and reproduction big and small block clutch bellcranks. Unlike cheap knock-offs offered elsewhere, ours are heat treated for hardness as original. Black oil finish. Overall length…
Best Quality Camaro Clutch Extension Wire Correct Length Plated As Original For Use On Small Blocks With Clutch Return Spring Our Part # CL-6 Fits 1967-1975 Small Block Fits 1967-1972 Big Block The Camaro coupe or convertible clutch spring…