Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of…
Buy The Kit And Save Money ! $ ! The Kit Includes: High Pressure Hose, Low Pressure Return Hose And Clamps Correct Fittings And Line Bends Correct GM Style Rubber Hose Fits All V8 Engines 1967-1968 Camaro power steering systems take…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
Restoration Correct
Correct Fit
Fits Inline 4, Inline 6, V6 And V8 Engines
Also Fits IROC-Z 1989-1990, Rally Sport 1992, Z28 1967-1992
Is the steering gear on your 1967-1992 Camaro leaking fluid at the pitman shaft seal?…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Reproduction Of Original This Camaro reproduction steering box tag has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work superbly for your…
Restoration Correct
Correct Fit
Fits Inline 4, Inline 6, V6 And V8 Engines
Also Fits IROC-Z 1989-1990, Rally Sport 1992, Z28 1967-1992
Is the steering gear on your 1967-1992 Camaro leaking fluid at the pitman shaft seal?…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
Dress up your Corvette Engine Bay with our 2008-2013 C6/Z06/GS Polished - Stainless Power Steering Reservoir Cover. This easy to install cover quickly transforms your factory power steering reservoir into a Polished Stainless Steel…
New Manual Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and filled with a high quality grease, ready for installation. All units are carefully packaged to insure safe arrival at your door. Backed…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with…
Buy The Kit And Save Money ! $ !
The Kit Includes: High Pressure Hose, Low Pressure Return Hose And Clamps
Correct Fittings And Line Bends
Correct GM Style Rubber Hose
Fits All V8 Engines
Fits Small Block And Big Block…
This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn, it can lead to future problems with your steering system and expensive…
Buy The Kit And Save Money ! $ ! The Kit Includes: High Pressure Hose, Low Pressure Return Hose And Clamps Correct Fittings And Line Bends Correct GM Style Rubber Hose Fits All V8 Engines Fits Small Block And Big Block Engines 1970-1972…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
Highest Quality Reproduction Steering Coupler For Cars With Power Steering Complete Assembly With Safety Straps Through Bolt Sold Separately Steering couplers are essential for your 1967, 1968 or 1969 Firebird's power steering conversion…
New column coupler flange used only on tilt columns. (Non-tilt columns have pressed on flange). Use special bolt {HR-31} to attach. (Bolt not included with flange)
…
Constructed of 1.25 x .120 DOM Tubing Powdercoated Red Easy Installation, Bolts Between Sway Bar Frame Mounts And Frame Rails This brace is designed to stiffen the front sub-frame and reinforce the steering box mount. It was factory…
OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…