×

WE ARE CURRENTLY EXPERIENCING DIFFICULTIES WITH OUR PHONE LINES.  PLEASE UTILIZE CHAT OR EMAIL TO CONTACT US UNTIL THIS IS RESOLVED.

877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
PLACE YOUR CAMARO ORDER NOW

Hooker Long Tube Stepped Header 2109-1HKR

Hooker Long Tube Stepped Header 2109-1HKR
Hooker Long Tube Stepped Header 2109-1HKRHooker Long Tube Stepped Header 2109-1HKRHooker Long Tube Stepped Header 2109-1HKR
$1,247.99 ea
NEWBackordered until 11/19/2021Out of stock at HOLLEY PERFORMANCE PRODUCTS as of 09/23/2021
Model: 4008701
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 1
STORE PICKUP
[More Info]
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.
Features:
  • Long Tube Geometry Designed For Max Ground Clearance
  • Long Taper Collectors For Smooth Exhaust Flow Transition
  • Laser Cut Flanges TIG Welded And Flat Finished
  • Leak-Free Seal
  • O2 Bungs Included
  • Bolt-In Installation
Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Installation Notes:
These headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. -Not compatible with stock manual transmission reverse lock-out linkage, aftermarket/custom linkage or cable drive set-up required to maintain mechanism operation.
About Hooker

The Hooker line of Super Competition and Competition headers, mufflers and catback exhaust systems are the most complete on the market.

Downloads:

Download Name File Size
199r10700rev5.pdf356.52KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Camaro 1967 5.3L / 327 / V8
4.9L / 302 / V8
5.7L / 350 / V8
Fits w/GM D-Port Heads[L98/LT1/LT4/Fastburn]; Silver Metallic Ceramic; Tube 1.75-1.875 in. OD; Collector Size 3 in. OD x 10 in.;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~GM D-Port Heads - L98/LT1/LT4/Fastburn~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Chevrolet Camaro 1968 5.3L / 327 / V8
4.9L / 302 / V8
5.4L / 327 / V8
5.7L / 350 / V8
Fits w/GM D-Port Heads[L98/LT1/LT4/Fastburn]; Silver Metallic Ceramic; Tube 1.75-1.875 in. OD; Collector Size 3 in. OD x 10 in.;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~GM D-Port Heads - L98/LT1/LT4/Fastburn~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Chevrolet Camaro 1969 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
5.7L / 350 / V8
Fits w/GM D-Port Heads[L98/LT1/LT4/Fastburn]; Silver Metallic Ceramic; Tube 1.75-1.875 in. OD; Collector Size 3 in. OD x 10 in.;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~GM D-Port Heads - L98/LT1/LT4/Fastburn~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty

Specifications:

Application Automotive
Coated Finish Stainless Ceramic
Collector Diameter 3.000 in.
Collector Tube Size 3.000 in.
Emission Code 4
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy LT1, GM LT4
Finish Silver Metallic Ceramic
Flange Length 0.375 in.
Flange Size 3/8 Inch
Head Style Long-Tube
Header Finish Silver Ceramic
Header Style Long Tube
Material Stainless Steel
Part Type Exhaust Header
Port Shape D-Port
Primary Tube Dia. 1-3/4 inch
Primary Tube Diameter 1.750 in.
Tube Diameter 1.750 in. x 1.875 in.
Tube Direction Down Swept
Tube Material Mild Steel
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker Long Tube Stepped Header 2109-1HKR:
* Your Name:
* Email (This will not be displayed)
Question:
Camaro Depot 2021