×

WE ARE CURRENTLY EXPERIENCING DIFFICULTIES WITH OUR PHONE LINES.  PLEASE UTILIZE CHAT OR EMAIL TO CONTACT US UNTIL THIS IS RESOLVED.

877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
PLACE YOUR CAMARO ORDER NOW

Hooker Super Competition Long Tube Header 2451-1HKR

Hooker Super Competition Long Tube Header 2451-1HKR
Hooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKRHooker Super Competition Long Tube Header 2451-1HKR
$774.99 ea
NEWARRIVING SOONEstimated Ship Date 10/06/2021 (If Ordered Today)81 available from HOLLEY PERFORMANCE PRODUCTS as of 09/20/2021
Model: 4008877
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 1
STORE PICKUP
[More Info]
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.
Features:
  • Tuned Length Tubes For Max Exhaust Scavenging/Velocity
  • Designed For Optimal Performance
  • Long Transition Collector For Decreased Back Pressure
  • Mandrel Bent Tubing For Smooth Exhaust Flow
  • Machined Flange Provides Finest Fit
  • Best Weld For Durability
  • All Hardware Included
Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Installation Notes:
NOTE: Installation requires air conditioning bracket Part #10925HKR left side or Part #10926HKRright side. This header is designed to fit multiple vehicle applications. As such, the collectors exit at two different heights in order to accommodate them all. If you are looking for a header with more available ground clearance, please check out part number 2466HKR or the Super Competition header designed specifically for your vehicle. Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts. This header will not fit with close ratio steering box or rack conversions. Lowered ride height may result in insufficient ground clearance Check (2466HKR or Super Competition header for your vehicle). This header was designed around the factory small block engine with factory heads. Raised port heads, D-port heads or non-stock plug locations may cause gasket leaks and header fitment issues that require modification to fit. This header will not work with angle plug heads. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
About Hooker

The Hooker line of Super Competition and Competition headers, mufflers and catback exhaust systems are the most complete on the market.

Downloads:

Download Name File Size
Warranty_Policy.pdf14.65KB
2451-1HKR.pdf242.73KB
199r10420rev1.pdf286.73KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Camaro 1967 6.5L / 396 / V8
5.3L / 327 / V8
4.9L / 302 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1968 6.5L / 396 / V8
5.3L / 327 / V8
4.9L / 302 / V8
5.4L / 327 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1969 6.5L / 396 / V8
5.3L / 327 / V8
5.0L / 307 / V8
4.9L / 302 / V8
5.4L / 327 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1970 5.0L / 307 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1971 5.0L / 307 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1972 5.0L / 307 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1973 5.0L / 307 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1974 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1975 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1976 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1977 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1978 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1979 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1980 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Chevrolet Camaro 1981 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Pontiac Firebird 1978 5.0L / 305 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Pontiac Firebird 1979 5.0L / 305 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Pontiac Firebird 1980 5.0L / 305 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes
Pontiac Firebird 1981 5.0L / 305 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 30 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit Rack Conversions~Will Not Fit With Angle Plug Or Raised Port Heads~Will Not Fit With Close Ratio Steering Boxes

Specifications:

Application Automotive
Coated Finish Metallic Ceramic
Collector Diameter 3.000 in.
Collector Tube Size 2.500 in.
Emission Code 4
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block
Finish Silver Metallic Ceramic
Head Style Long-Tube
Header Finish Silver Ceramic
Header Flange Thickness (in) 5/16 inch
Header Style Long Tube
Material Mild Steel
Part Type Exhaust Header
Port Shape Same As Port/Can Be Matched
Primary Tube Dia. 1-5/8 inch
Primary Tube Diameter 1.625 in.
Tube Diameter 1.625 in.
Tube Direction Down Swept
Tube Material Mild Steel
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker Super Competition Long Tube Header 2451-1HKR:
* Your Name:
* Email (This will not be displayed)
Question:
Camaro Depot 2021