877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
PLACE YOUR CAMARO ORDER NOW

UMI Performance Dbl-Adj Panhard Bar - Roto Joints | 2038-B Camaro 1982-02

UMI Performance Dbl-Adj Panhard Bar - Roto Joints | 2038-B Camaro 1982-02
$293.99 kt
NEWARRIVING SOONEstimated Ship Date 12/04/2020 (If Ordered Today)
Model: 3233025
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
STORE PICKUP
[More Info]

  • Fits 1982 To 2002 Chevrolet Camaro
  • Fits 1982 To 2002 Pontiac Firebird
  • Constructed Of 1.250" x 0.095" DOM Mild Steel Tubing
  • 4140 Chrome Moly Threaded Tube Adapters
  • Dual Spherical Roto-Joints Installed For Adjustment And A Bind Free Performance
  • Energy Suspension Grease-able Polyurethane Bushings
  • Fully TIG Welded
  • On Car Adjustable With Out Unbolting Item
  • Shipped Fully Assembled And Ready To Install
  • Uses OEM Hardware And Installed In 20 Minutes
  • Brilliant And Durable Powder Coat Finish

NOTE: Chrome Moly - Chrome Moly version Uses 1.250" x 0.095" 4130 Chrome Moly
steel. The chrome moly construction adds higher tensile and yield strength than mild
steel applications for the ultimate in product strength.

This tubular double adjustable panhard bar replaces the flimsy stock stamped 
panhard bar while adding increased strength and on car rear end adjustment. This 
panhard bar is a must for rear end centering after vehicle lowering, as well as 
clearance for running larger tires. If you are looking for the maximal performance 
from your vehicle you can not go wrong with this setup. This double adjustable 
panhard bar features 100% TIG welded fabrication for the utmost in strength and 
spherical Roto-Joints for a bind free performance. This double adjustable panhard bar 
features left and right hand threads for quick and easy on-car adjustments by simply 
loosening two jam nuts, the panhard bar does not require removal to adjust. The 
spherical Roto-Joint set up eliminates rear end bind, which is an excellent 
improvement for your street, autocross or drag race application. The Roto-Joint 
design improves performance over the factory rubber and aftermarket polyurethane 
bushings by allowing the suspension to articulate correctly, and provide precision 
handling. As well as easy adjustments, this heavy duty panhard bar also increases 
rear stability, controls side movement and body flex. This item is built using only the 
best American products on the market. 

Spanner Wrench- This spanner wrench is used for adjusting and disassembling 
Roto-Joints used in all UMI Performance products. Over time if the delrin race inside 
the Roto-Joint would wear the spanner wrench is used to tighten the adjusting ring 
applying more pressure to the delrin inside. The spanner wrench is also used to 
disassemble the Roto-Joint for cleaning, inspection and rebuilding.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1982 - 1987

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

UMI Performance Dbl-Adj Panhard Bar - Roto Joints | 2038-B Camaro 1982-02:
* Your Name:
* Email (This will not be displayed)
Question:
www.camarodepot.ca 2020