877.589.9860 Contact Us Mon-Sat 10a-6p

UMI Performance Torque Arm Relocation Kit- TH350 | 2212-R Camaro 1998-02

UMI Performance  Torque Arm Relocation Kit- TH350 | 2212-R Camaro 1998-02
$633.99 kt
NEWARRIVING SOONEstimated Ship Date 07/29/2024 (If Ordered Today)
Model: 3181102
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.

  • Fits 1998 To 2002 Chevrolet Camaro
  • Fits 1998 To 2002 Pontiac Firebird
  • Kit Allows The Installation Of A TH350 Transmission Into A 1993-02 F-Body*Features Provisions For Running A Stock Style Torque Arm
  • This Cross Member Is Designed To Tuck Tight Against The Vehicle Chassis And Will Not Effect Vehicle Ground Clearance
  • This Set-Up Works With Virtually Any Torque Arm On The Market As Long As It Bolts Into The Stock Location
  • Works Excellently With The Stock Torque Arm
  • In Most cases This Cross Member Will Save Weight Over The Stock Unit While Being Structurally Stronger
  • Kit is 100% Bolt In And Requires No Drilling, No Cutting And No Welding

Note: This product must be used with a solid one-piece polyurethane bushing. It will not work with the factory bushing that utilizes a two-piece design. If using a stock torque arm with this relocation kit an aftermarket polyurethane bushing must be purchased. This item can be purchased above, Item # 3004.*

Installing a TH350 Automatic transmission into your 98-02 Camaro or Firebird just got easier. This cross-member with integrated torque arm mount features the correct provisions for mounting the TH350 transmission while still allowing the use of a factory style torque arm. The built in torque arm mount will work with virtually any stock style aftermarket torque arm as well as the factory torque arm and features instant center adjustment by moving the front of the torque arm up or down. This unit is built using DOM mild steel tubing, 0.188” mild steel mounting plates and includes all appropriate hardware needed for the installation. The torque arm mount is machined from 0.250” thick mild steel and features a new clam shell for appropriately attaching the torque arm to the new cross member. There is no need to purchase any other torque arm brackets when using this kit.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1998 - 2002


Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:

Ask a question about

UMI Performance Torque Arm Relocation Kit- TH350 | 2212-R Camaro 1998-02:
Camaro Depot 2024