877.589.9860 Contact Us Mon-Sat 10a-6p

UMI Performance Torque Arm Relocation Kit- TH350 |2230-B Camaro 1982-92

UMI Performance Torque Arm Relocation Kit- TH350 |2230-B  Camaro 1982-92
$632.99 kt
NEWARRIVING SOONEstimated Ship Date 06/07/2024 (If Ordered Today)
Model: 3159967
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.

  • Fits 1982 To 1992 Chevrolet Camaro w/ TH350 Transmission
  • Fits 1982 To 1992 Pontiac Firebird w/ TH350 Transmission
  • This Kit Allows For The Installation Of A TH350 Transmission Into Aa 1982-1992 F-Body And Features Provisions For Running A Stock Style Torque Arm
  • This Cross Member Is Designed To Tuck Tight Against The Vehicle Chassis And Will Not Effect Vehicle Ground Clearance
  • This Set-up Will Work With Virtually Any Torque Arm On The Market As Long As It Bolts Into The Stock Location
  • It Will Also Work Eexcellently With The Stock Torque Arm When Using Aa 1-Piece Bushing (Item #3004)
  • This Kit Is 100% Bolt In And Requires No Drilling, No Cutting And No Welding
  • It Bolts In Place Of The Stock Cross Member Using The Existing Holes

Note: This product must be used with a solid one-piece polyurethane bushing. It will not work with the factory bushing that utilizes a two-piece design. If using a stock torque arm with this relocation kit an aftermarket polyurethane bushing must be purchased. This item can be purchased below, Item # 3004.*

Installing a TH350 automatic transmission into your 82-92 Camaro or Firebird just got easier. This transmission cross-member with integrated torque arm mount features the correct provisions for mounting the TH350 transmission while still allowing the use of a factory style torque arm. The built in torque arm mount will work with virtually any stock style aftermarket torque arm as well as the factory torque arm and features instant center adjustment by moving the front of the torque arm up or down. This unit is built using DOM mild steel tubing, 0.188” mild steel mounting plates and includes all appropriate hardware needed for the installation. The torque arm mount is machined from 0.250” thick mild steel and features a new clam shell for appropriately attaching the torque arm to the new cross member. There is no need to purchase any other torque arm brackets when using this kit.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1982 - 1987


Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:

Ask a question about

UMI Performance Torque Arm Relocation Kit- TH350 |2230-B Camaro 1982-92:
Camaro Depot 2024