877.589.9860 Contact Us Mon-Sat 10a-6p

UMI Preformance Lower Control Arms and Adj Panhard Bar Kit- Red | 203337-R Camaro 1982-02

UMI Preformance Lower Control Arms and Adj Panhard Bar Kit- Red | 203337-R Camaro 1982-02
$889.99 kt
NEWARRIVING SOONEstimated Ship Date 03/11/2024 (If Ordered Today)
Model: 3144373
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.

  • Fits 1982 To 2002 Chevrolet Camaro
  • Fits 1982 To 2002 Pontiac Firebird
This kit includes a set of rear lower control arms and a on car adjustable panhard bar. 
These items feature polyurethane bushings on one end and UMI's spherical Roto-
Joint on the other end. This set up is designed for street performance and street 
enthusiast. The polyurethane bushing end is designed to be bolted to the vehicle 
chassis side while the Roto-Joint attaches to the rear end side. Since the polyurethane 
bushings are softer they are designed to absorb more road noise and shock before it 
enters the passenger compartment of the vehicle. The Roto-Joint design is a pivot ball 
lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted 
movement, more than adequate for a bind free, low friction operation. The Roto-Joint 
design improves performance over the factory rubber and aftermarket polyurethane 
bushings by allowing the suspension to articulate correctly, and provide precision 
handling. The included panhard bar is a must for rear end centering after vehicle 
lowering, as well as clearance for running larger tires. The supplied CNC machined 
double adjuster features left and right hand threads for quick and easy on car 
adjustments by simply loosening two jam nuts, the panhard bar does not require 
removal to adjust. The spherical Roto-Joint/polyurethane bushing combination 
eliminates most rear end bind while not sacrificing ride quality making this is an 
excellent improvement on any street or drag application. All bushing ends and Roto-
Joints are greaseable and low maintenance making an excellent street setup for your 

Spanner Wrench- This spanner wrench is used for adjusting and disassemble of 
Roto-Joints used in all UMI Performance products. Over time if the delrin race inside 
the Roto-Joint would wear the spanner wrench is used to tighten the adjusting ring 
applying more pressure to the delrin inside. The spanner wrench is also used to 
disassemble the Roto-Joint for cleaning, inspection and rebuilding.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1982 - 1987


Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:

Ask a question about

UMI Preformance Lower Control Arms and Adj Panhard Bar Kit- Red | 203337-R Camaro 1982-02:
Camaro Depot 2024