Changing suspension components in your 1982-1992 Chevrolet Camaro and Pontiac Firebird (F-body) can sometimes cause bump steer or unwanted toe changes during suspension travel. QA1's easy-to-install Bump Steer Kit corrects this problem.
Bump steer is caused by misalignment in the suspension geometry, leading the wheels to turn slightly in and out as the suspension travels up and down. These direct bolt-in kits allow users to relocate the outer tie rod end lower or higher to match the ride height and angle of the control arms through suspension articulation.
The included hardware and stud taper ensure an exact fit with the 3rd gen Camaro and Firebird spindle and steering linkage, making installation easy.
QA1 suspension is proudly made in Lakeville, Minnesota.
• Direct-fit design for easy installation
• Adjustable outer tie rod end to correct bump steer
• Precision fit with 3rd gen f-body spindle and steering linkage
• Proudly made in the USA
From bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.
Whether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.
No matter what you drive, we want you to #goDRIVEit!
| Download Name | File Size |
| 9919-336_REV_ 3RD Gen F_Body BUMP STEER KIT.pdf | 1.21MB |
| Make | Model | Years |
| Chevrolet | Camaro | 1982 - 1992 |
| Pontiac | Firebird | 1982 - 1992 |
| Part Type | Steering Bump Steer Assembly |
| Proposition 65 | www.P65Warnings.ca.gov |
| Warranty Time | 1 YR |
