877.589.9860 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST

UMI Performance K-Member & A-Arm Pkg, LSX, Factory Spgs- Blk | 240331-B Camaro1982-92

UMI Performance K-Member & A-Arm Pkg, LSX, Factory Spgs- Blk | 240331-B Camaro1982-92
$2,402.99 kt
NEWARRIVING SOONEstimated Ship Date 12/08/2020 (If Ordered Today)
Model: 3267357
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
[More Info]

  • Fits 1982 To 1992 Chevrolet Camaro
  • Fits 1982 To 1992 Pontiac Firebird
  • Reduces 25 lbs Of Front End Weight
  • Allows Easy Installation Of Any LSX Engine
  • LSX Adapter Mounts Work With Factory Rrubber LS Motor Mounts, Polyurethane Mounts Or
  • UMI’s Solid Mounts P/N 2323
  • K-Member Accepts Factory Springs And Lowering Springs
  • Includes New 10.9 Mounting Hardware For K-Member And A-arms
  • Double Tube Construction For Superior Strength
  • Strong 3/16” Thick Mild Steel Engine Aand Suspension Mounts Held Together With 1-1/2”
  • Dia DOM Tubing
  • CNC Machined And Jig-Built For No Hassle Installation
  • MIG And TIG Welded
  • Direct Bolt-in Design
  • Lower A-arms Are Jig-Built With Polyurethane Bushings Installed (See P/N 2031 For
  • Complete Details)
  • Durable Red Or Black Powder Coat
  • Modular Design Allows Use Of Coil-Overs And/Or LS Mounts For Minimal Cost
  • Manufactured With Pride In Philipsburg, PA – USA

We all know weight equals horsepower. UMI’s direct bolt-in replacement K-member and 
lower a-arm kit instantly removes 25 lbs of front end weight from your ride and helps your 
existing horsepower work for you. Strong dual tube construction and a host of high-
strength features ensure this kit will survive street use, drag strip blasts and autocross 
action. The K-member is fabricated from CNC machined 3/16” thick mild steel held together 
by a strong dual tube lower section. Included fabricated motor mounts are used to bolt any 
LSX engine to the precision machined mounting pads while both factory and aftermarket 
suspension is located by strong boxed mounting points. Lightening holes are CNC 
machined into the mounting plates and the tubular construction provides added clearance 
for aftermarket exhaust. The k-member design permits stock spring and strut use while the 
lower a-arms feature a spring locating pocket. The lower a-arms feature TIG welded tubular 
construction, adjustable steering stops and polyurethane bushings. Street and track testing 
on our test car has shown this k-member and a-arm kit to be strong, reliable and a great 
upgrade for your high performance ride. Available in tough powder coated red or black 
finish. Manufactured with pride in Philipsburg, PA – USA. Save $20.00 when purchasing 
these items as a kit! 

Note: If using Factory LS A/C the A/C compressor needs relocated when running a UMI 
tubular k-member, we recommend purchasing an A/C relocation kit.  K-member was 
designed around the LS1 oil pan and also works with the Holley 302 oil pan. Other oil pans 
may not clear. Included k-member can also be used with a factory SBC engine by not 
installing the included LSX motor mount stands.

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1982 - 1987


Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:

Ask a question about

UMI Performance K-Member & A-Arm Pkg, LSX, Factory Spgs- Blk | 240331-B Camaro1982-92:
* Your Name:
* Email (This will not be displayed)
www.camarodepot.ca 2020