13 results for Electrical : Engine Compartment : Ignition : Ignition Hardware : All Productsgo

In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use…

The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. This is our a direct replacement kit for the MSD HEI…

Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of…

MSD 8.5MM Performance Wire Set Longer Plug Wires Up To 15 Long 2 Wires 13 For Cylinders 5 And 7 6 Wires 15 Long Multi-Angle Boots Recommend Bending To 45 Degree Angle For Best Fit Highly Conductive Wire Set Very Low Resistance For Use With…

…

Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of…

…

…

The cap and rotor of any ignition system must be considered maintenance items. To make things easy, we offer these Cap and Rotor Replacement Kits Features:Fits MSD/GM V8 Distributors …

…

The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor…

…

Transistorized Ignitions (TI) also known as Delcotron Transistor Control Magnetic Pulse Ignition Systems were available for the Camaro from the Heavy Duty (read RACE) Parts catalog over the counter at your local GM dealership. These…