This pivoting support for the steering linkage appears on older recirculating ball-type steering systems (pre-rack & pinion) and functions like the pitman arm in a rack and pinion system. This cast-iron steering idler arm features two holes for mounting to the frame, a rubber boot on the mounting section of the idler arm and features an eyelet or opening on the end that attaches to the center drag link. Each assembly inclides: (1) Arm, (1) Bracket, (1) Dust Boot, (1) Castle Nut, (1) Cotter Pin, (1) Grease Fitting.
Product Specifications
# Bracket Holes: 2
Length Center to Center: 5.931
Hardware Included: No
Ball Design: No
Arm Type: Bent
Arm Fixture: Hole
Bracket Fixture: Stud
Arm Fixture Stud Thread/Hole Inside Diameter: 0.557
Greasable: Yes
Buick Applications
1975 - 1975 Buick Apollo Base
1975 - 1975 Buick Apollo SR
1976 - 1979 Buick Skylark S
1975 - 1979 Buick Skylark Base
1978 - 1979 Buick Skylark Custom
1978 - 1978 Buick Skylark Sport
1975 - 1977 Buick Skylark SR
Cadillac Applications
1976 - 1979 Cadillac Seville
Chevrolet Applications
1970 - 1980 Chevrolet Camaro Base
1981 - 1981 Chevrolet Camaro Sport
1970 - 1975 Chevrolet Camaro RS
1973 - 1978 Chevrolet Camaro LT
1979 - 1981 Chevrolet Camaro Berlinetta
1976 - 1978 Chevrolet Camaro LT Rally Sport
1976 - 1980 Chevrolet Camaro Rally Sport
1970 - 1981 Chevrolet Camaro Z28
1970 - 1972 Chevrolet Camaro SS
1975 - 1977 Chevrolet Nova Base
1975 - 1975 Chevrolet Nova Custom
1976 - 1977 Chevrolet Nova Concours
1976 - 1976 Chevrolet Nova SS
1975 - 1977 Chevrolet Nova Police
1977 - 1977 Chevrolet Nova Rally
1975 - 1975 Chevrolet Nova LN
1975 - 1979 Chevrolet Nova
Oldsmobile Applications
1976 - 1978 Oldsmobile Omega SX
1975 - 1979 Oldsmobile Omega Base
1977 - 1977 Oldsmobile Omega Deluxe
1975 - 1975 Oldsmobile Omega Salon
1976 - 1979 Oldsmobile Omega Brougham
1978 - 1979 Oldsmobile Omega Brougham LS
1976 - 1977 Oldsmobile Omega F85
Pontiac Applications
1970 - 1981 Pontiac Firebird Base
1970 - 1981 Pontiac Firebird Esprit
1970 - 1981 Pontiac Firebird Formula
1970 - 1981 Pontiac Firebird Trans Am
1971 - 1971 Pontiac GTO
1977 - 1979 Pontiac Phoenix
1979 - 1979 Pontiac Phoenix Base
1979 - 1979 Pontiac Phoenix SJ
1979 - 1979 Pontiac Phoenix LJ
1975 - 1975 Pontiac Ventura S
1975 - 1976 Pontiac Ventura Base
1975 - 1975 Pontiac Ventura Custom
1975 - 1976 Pontiac Ventura SJ
1975 - 1977 Pontiac Ventura
About OER
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
