- Fits 1982 To 2002 Chevrolet Camaro
- Fits 1982 To 2002 Pontiac Firebird
- Constructed Of 1.250” x 0.120” DOM Mild Steel Tubing
- TIG Welded 4140 Chrome Moly Tube Adapters
- On Car Adjustable Using A Chrome Moly, Heat Treated Adjuster
- Swivel Roto-Joints Installed
- Roto-Joints Are Grease-able And Rebuildable
- Shipped Fully Assembled And Ready To Install
- Uses OEM Hardware
- Brilliant And Durable Powder Coat Finish
UMI's on car adjustable lower control arms utilize our Roto-Joint technology for a bind free performance, quiet ride quality, and also offer on car adjustment. The control arms can be adjusted longer or shorter moving the rear end back or forward to squeeze those larger tires in the fender wells. Adjustable control arms are also recommended for most aftermarket rear end installs to center the rear end and prevent tire rubbing. The installed
Roto-Joint is a pivot ball lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted movement, more than adequate for a bind free, low friction operation. The Roto-Joint design improves performance over the factory rubber and aftermarket polyurethane bushings by allowing the suspension to articulate correctly, and provide precision handling. This control arm set features polyurethane bushings on one end and UMI’s spherical Roto-Joint on the other end. This set-up is designed for street performance and street enthusiast. The polyurethane bushing end is designed to be bolted to the vehicle chassis side while the Roto-Joint attaches to the rear end side. Since the polyurethane bushings are softer they are designed to absorb more road noise and shock before it enters the passenger compartment of the vehicle. All bushing ends and Roto-Joints are greaseable and low maintenance making an excellent street setup for your cruiser!
Spanner Wrench- This spanner wrenched is used for adjusting and disassemble of Roto-Joints used in all UMI Performance products. Over time if the delrin race inside the Roto-Joint would wear the spanner wrench is used to tighten the adjusting ring applying more pressure to the delrin inside. The spanner wrench is also used to disassemble the Roto-Joint for cleaning, inspection and rebuilding.
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
||1982 - 1987
Ask a question about
UMI Performance Adj Ctrl Arms, Poly, Roto Joint Red | 2039-R Camaro 1982-02: