|Availability:||Ordered From Supplier. Estimated Ship Date 05/01/2019 (If Ordered Today)|
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
|Shipping Note:||Standard Delivery|
We'll find it for you. Give us a call at 877.589.9860 and we'll source that discontinued or hard to find part.
No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.
Camaro Depot always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.
Benefits of Running the C5/C6 Set Up
The UMI 2120 brake conversion bracket is designed to mount 1997-2013 C5 or C6 front calipers and rotors to the 93-02 GM F-Body spindle. Our brackets are CNC laser cut from 3/8” thick mild steel. The CNC turned stand-offs are fully welded to the laser cut base for strength and a precision fit. The conversion brackets are supplied in a heavy duty black powder coat finish and each kit is includes Grade 10.9 mounting hardware and complete detailed installation instructions. As with all UMI Performance products, these brackets are manufactured in Philipsburg, PA – USA.
1. To install brackets both LT1 and LS1 spindles require modifications. This simple modification can be done while the spindle is on the car and requires a small amount of cutting and grinding. LS1 models require less cutting than LT1 models. Instructions included.
2. There are many rotor and brake pad setups available for the C5/C6 Corvette and various driving applications may require a different setup. Please note these are the adaptor brackets only and to complete installation you must purchase rotors, calipers, abutment brackets and pads separately. Each installation sheet is very detailed and will provide a list of items needed to perform and complete the installation.
C5 brackets require a minimum of a 17” wheel for clearance while C6 requires 18”. All 1996 and newer F-Body 17” wheels will work with the C5 brakes. If you are running a different wheel set up please research fitment before purchasing.
From our research we have found the following wheels will NOT clear with the conversion kit, they may clear with the correct wheel spacers:
1. Enkei Win- 17” x 9.5”
2. 93-94 SLP Firehawk wheel- 17” x 9”
3. Borbet Type T- 17” x 9.5”
4. Forgeline RS Reverse Rim
5. Torque Thrust II
6. Konig Monsoon 17"
|Chevrolet||Camaro||1993 - 1999|
Note: HTML is not translated!
Rating: Bad Good