OER 4 Leaf Rear Leaf Springs (Spring Rate 126 Lbs) - Replacement Style *RL12

OER 4 Leaf Rear Leaf Springs (Spring Rate 126 Lbs) - Replacement Style *RL12

$418.99 pr
Model:2029102
No Discount / Limited Discount
Condition: NEW
Availability:Ordered From Supplier. Estimated Ship Date 06/13/2019 (If Ordered Today)
Fitment:
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
Shipping Note:Oversize 2
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 877.589.9860 and we'll source that discontinued or hard to find part.

Why Choose Us?

No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.

Disclaimer

Camaro Depot always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

Replace the sagging leaf springs on your classic with high quality reproductions manufactured exclusively for OER®! These reproduction rear leaf springs are designed for an exact, direct replacement of the originals.

Front eye bushings are pre-installed. Use part number 32103G for urethane bushing set, or part number *R396 for OEM style bushing set.

Note: Shipped double oversize. No further discounts apply.

Application Notes:

  • Camaro: Mono leaf springs were originally installed on all 1967 and base 1968-69 Camaro models. The four-leaf springs were used exclusively on 1968-69 Z28 Camaro. Five leaf springs were originally installed on 1969 Super Sport models.

 

Firebird: Mono leaf springs were originally installed on all 1967 Firebird models. 1968-81 Firebird models used either four or five leaf springs. The four leaf springs were used on 1968-69 heav y duty applications, 1969 400 models, and most 1970-81 Firebird models. Five leaf springs were originally installed on all 1968-81 standard applications and lower performance models. All models: Original single rear leaf springs can be replaced with multi leaf springs by simply replacing the U-bolts and adding shock extenders which allow the springs to seat correctly.
About OER

OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.

Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Camaro 1967 - 1981

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

OER 4 Leaf Rear Leaf Springs (Spring Rate 126 Lbs) - Replacement Style *RL12:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Shipped from Canada
No Brokerage/Duties
Canadian Owned
www.camarodepot.ca 2019